How to Test a Car Fuse Box for a Current

Save

An automobile typically has two fuse boxes. One, located in the engine compartment, is for the motor's electrical needs, and one in the cab of the vehicle is for accessories and lights. The fuses protect each circuit from excessive amps, which may damage the components. Troubleshooting an electrical short requires tracking down the bad connection through trial and error. One place to check is at the connections in the fuse boxes, using a 12-volt test light.

Things You'll Need

  • 12-volt test light
  • Open the panel on the front of the fuse box by prying back its latch with your hand.

  • Turn the vehicle's ignition to the "power on" position without starting the engine.

  • Secure the 12-volt test light's alligator clip to any bare metal near the fuse box. A bolt is a good location.

  • Touch the bare metal on top of each fuse with the test light's probe. If the 12-volt test light illuminates, there is current at that connection.

  • Touch the bare metal inside each fuse holder if you are looking for a spare fuse location that has a current.

  • Photo Credit Jupiterimages/Photos.com/Getty Images
Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

How To Travel For Free With Reward Points

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!