How to Rewire an Old Rotary Telephone to Be Modular


Rotary telephones add a touch of old-world class and stand out amidst the ho-hum of plastic phones populating most households. You can attach a rotary phone to your home's modular telephone connection to use it to take and receive calls, while taking advantage of its looks to enhance the decor of a room. The rotary phone plug will be replaced with a modular plug. Household tools and supplies from an electronics store or the electronic section in a hardware store are necessary.

Things You'll Need

  • Utility knife
  • Ruler
  • Wire stripper
  • Flat-edged jeweler's screwdriver
  • Modular plug
  • Soldering iron
  • Solder
  • Cut the plug off the rotary phone's telephone cord with a utility knife.

  • Cut three inches into the outer insulation at the end of the cut telephone cord with the utility knife. Peel the insulation back to reveal the inner wires. Strip a 1/2 inch of insulation from the ends of the red and green wires with a wire stripper that are now revealed.

  • Insert the tip of a flat-edge jeweler's screwdriver into the seam on one side of the modular plug. Pull up on the tip to loosen the two sections of the modular plug from each other. Pull the two sections apart.

  • Place the section of the modular plug that has the contacts at one edge on a work surface. Rotate the it so that the end of the section that has the contacts is facing you.

  • Plug a soldering iron into a wall outlet. Let the soldering iron heat up for 10 minutes.

  • Solder the end of the green wire from the telephone plug to the extreme left contact on the modular plug section. Solder the end of the red wire to the contact that is right next to the one that now has the red wire soldered to it. Let the solder cool for two minutes.

  • Snap the section of the modular plug that was placed aside back onto the section that now has the telephone cord soldered to it. Plug the modular plug into the modular socket on the telephone wall plate so that the rotary telephone can make and receive phone calls.

Tips & Warnings

  • Protective gloves will ensure your safety when using the soldering iron.

Related Searches


  • Photo Credit Jupiterimages/Polka Dot/Getty Images
Promoted By Zergnet


You May Also Like

Related Searches

Check It Out

Geek Vs Geek: Robot battles, hoverboard drag race, and more

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!