Instructions for the Bissell 3-in-1

Save

The Bissell 3-in-1 is a convertible vacuum that switches from a standard floor vacuum to a hand vacuum for use on stairs, cars and other small places. The vacuum has a 2 amp motor and weighs less than 4 pounds with a 16-foot-long cord. Available in many home retail or department stores as well as on the Internet, the 3-in-1 is generally straightforward to use and should perform well with regular care and maintenance.

Things You'll Need

  • Waste container
  • Dishwashing liquid

Standard Vacuum

  • Open the latch at the bottom of the vacuum grip and insert the handle. Push firmly into place and press the latch closed.

  • Push the floor nozzle into the opening located at the bottom of the dirt container. Plug the power cord into an electrical outlet and turn the power switch to "On."

  • Push the vacuum back and forth over the area to be cleaned, working in overlapping sections for best results.

  • Turn the vacuum "Off" when finished and unplug the power cord.

  • Hold the vacuum vertically and push down on the latch located on top of the unit to release the dirt cup. Pull the dirt container out and remove the filter. Empty out the dirt and tap the filter over a waste container. Replace the container on the Bissell.

  • Wash the filter periodically with warm water and a few drops of dishwashing liquid. Rinse well and dry completely before placing the filter back in the dirt cup.

Hand Vacuum

  • Release the latch on the handle and pull it out of the vacuum. Push the latch closed.

  • Plug the power cord into a power outlet and turn the power "On."

  • Move the vacuum in a back-and-forth motion over the area to be cleaned.

  • Turn the power "Off" and unplug the vacuum when finished.

  • Follow the steps in the above section to clean the dirt container and filter.

References

Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!