Multiport valves control the water that flows through a swimming pool's plumbing system. Swimming pools utilize multiport valves to direct water to flow to specific systems at certain times. The multiport valve utilizes a diverter and spider gasket to change the direction in which the pool water flows when the handle on top of the valve moves.
Things You'll Need
- Small screwdriver
- Replacement spider gasket
- O-ring lubricant
Place a small screwdriver or other thin, rigid object against the pin holding the valve handle to the valve body. Tap the end of the screwdriver or object to remove the pin from the handle. Pull the handle off the multiport valve. Remove the metallic spring and the Teflon washer from the valve body.
Unscrew and remove the screws positioned around the top of the multiport valve body. Pull the valve's cap off the body to expose the spider gasket.
Pull the old spider gasket off the interior of the multiport valve. If the spider gasket refuses to move, use a flat screwdriver or smaller pocket knife to peel the gasket away from and off the valve.
Coat the replacement spider gasket in an O-ring lubricant such as Aqua-Lube, or a general lubricant such as petroleum jelly. Set the spider gasket down onto the interior of the valve, matching up the legs of the gasket with the legs on the valve interior.
Place the valve cap on the valve body. Set the Teflon washer and metallic spring on the valve in the same position as they were in before removal. Place the valve handle over the washer and spring. Hold the handle down and insert the pin into the handle. Tap the pin with a hammer to fully insert it into the handle.
Tips & Warnings
- Turn off the pool pump and filter whenever you need to move the multiport valve handle. Moving the multiport valve handle during pool operation can damage the spider gasket inside the valve.
Why Does My Vari-Flo Valve Leak With a Hayward Pool Filter?
A Hayward Vari-Flo multi-port valve's ability to be quickly and easily switched between the filter, backwash, rinse, waste, recirculate, closed and/or winter...
How to Use a Swimming Pool Multiport Valve
Multiport valves go by a variety of names including the filter control valve, the backwash valve or the Vari-Flo valve. The multiport...
How to Operate a Pool Pump & Filter
The pump and filter system associated with an above ground swimming pool is the first line of defense in maintaining clear and...
How to Change a Hayward Vari Flo Valve Gasket
The Hayward Vari Flo multi-port valve functions as a backwash valve for many sand pool filtration systems. Multi-port valves like the Vari...
How to Seal Swimming Pool Gaskets
A swimming pool filter traps dirt, grime and all forms of contaminants that otherwise would end up in the water that people...