Dehumidifiers are used to remove excess moisture from the air. The small electrical appliances are plugged into a two-prong outlet. After you have been using your dehumidifier for a few weeks, you will know how often it runs and how much water it collects. If it seems that your dehumidifier is not running the way it normally would, find out if you can fix the problem yourself before calling for service or purchasing a new dehumidifier.
Things You'll Need
- Vacuum cleaner
- Brush attachment
Check that the dehumidifier is plugged in properly to the wall outlet if it stops running. Check the circuit breaker to see if it was tripped.
Remove the bucket and empty the bucket if it is full of water. Reinstall the bucket. The dehumidifier will not run if the bucket is not placed correctly or if it is full.
Close all windows and doors while running your dehumidifier. If they are left open, the dehumidifier will not shut off. It also may not shut off if the room is too large for that particular dehumidifier.
Clean the grill with the vacuum cleaner's brush attachment and move it away from any walls. Dehumidifiers need at least 12 inches of open space surrounding them in order to operate properly.
Wait one hour after turning the dehumidifier on for frost to disappear from the coil. The occurrence of frost is normal if you have just turned your dehumidifier on after it has been off for awhile. This is due to the refrigerant. If the frost does not go away, make sure the room temperature is above 41 degrees F.
- Photo Credit Comstock/Comstock/Getty Images
How to Dry Wet Carpet in the Basement
Water leaking into a basement due to cracks in the foundation or cracks in the concrete floor can cause damage to both...
How to Troubleshoot a Kenmore Dehumidifier
Kenmore dehumidifiers are very useful to reduce air humidity levels in a room. Excessive humidity can produce problems including water damage, mold,...
Why Would My Air Conditioner Shut Off Too Soon?
Air conditioner units can shut off unexpectedly for a variety of reasons, including user error, a dirty filter, a system freeze and...