How to Replace a Broken Window in My 2001 GMC Jimmy

How to Replace a Broken Window in My 2001 GMC Jimmy thumbnail
Car windows are made to not shatter.

Replacing a broken window in a 2001 GMC Jimmy is more common than you realize. Any vehicle can have a broken window as a result or flying road debris and even bad weather. The GMC Jimmy, though, has as a design flaw issue with the power windows. The Jimmy has had its share of broken window issues stemming from a weakness in the power window motor and lift bracket. Car insurance may not cover a broken door window. Any do-it-yourself handyman can replace a Jimmy window with enough patience and the right tools.

Things You'll Need

  • Flat head screwdriver
  • Utility knife
  • Gloves
  • Shop vacuum
  • Ratchet set
  • New glass
Show More

Instructions

    • 1

      Take a flat head screwdriver and remove the door panel screws and snap-on clips. Use light pressure to remove snap-on clips. Remove the inside door panel.

    • 2

      Cut the weatherproofing plastic out of the car door with a utility knife. The black tape can stay in place.

    • 3

      Find the lift mechanism and the bracket and clips that hold the window in place. The white clip holds the glass in place. Remove any broken glass from the bracket and clips.

    • 4

      Slide your hands into gloves that glass splinters will not penetrate. Remove the broken glass from the lift and the bottom area of the door. Use a shop vacuum to remove any little pieces you can't see or feel.

    • 5

      Rub your fingertips along the weather stripping surrounding the window opening. Gently snap the weather proofing off the door. Check for more glass in the slot of the door frame and remove any pieces remaining. Reach inside the slot and remove the clips that hold the glass onto the lift arm.

    • 6

      Insert the new glass from the top and guide it to sit on the lift arm. Tighten the nuts that hold the glass in place. Use your fingers to tighten first and then use a ratchet, but be careful to not tighten the nuts so much the glass cracks or breaks.

    • 7

      Lift the arm with the new glass in place, making sure it doesn't catch on anything. If the glass window goes up and down without a problem, then reassemble the door. Don't forget to re-apply weatherproofing inside the door panel.

Tips & Warnings

  • If the car is old, while the door is apart you might want to replace the window motor and lift arm before another problem arises.

  • Put a tarp on the ground under the door you are disassembling. Any broken glass in the door will fall on the tarp, instead of on the ground where tires can pick up the splinters.

Related Searches

References

Resources

  • Photo Credit broken car glass image by Cristiano Visigalli from Fotolia.com

You May Also Like

Related Ads

Featured
View Mobile Site