How to Remove Bostik Glue


Bostik Best Glue is one of the most used adhesives for hardwood flooring on the market today. This super strong glue is one of few that has an installation warranty, when used in combination with Mirage engineered wood flooring. While Bostik is more than capable of holding your flooring in place, it can be a bit more difficult to remove from unwanted areas, especially after it has cured. The best way to remove Bostik glue is to remove it as you proceed through the installation process.

Things You'll Need

  • Mineral spirits or Bostik adhesive remover
  • 2 clean cloths
  • Apply a liberal amount of mineral spirits to a soft, clean cloth. Bostik also manufactures their own brand of adhesive remover that is specifically designed to remove the glue.

  • Wipe the area that has the excess glue as soon as you notice it. The longer you wait, the harder it will be to get off.

  • Use another clean cloth to remove any mineral spirits residue or leftover adhesive remover. Leaving these products on your hardwood floor could damage the finish.

  • Scrub the area harder with a cloth, if the glue has cured. If you used the glue on a tile floor, you can be more liberal with your cleaning agents, because you don't have to worry about ruining the finish.

Related Searches


  • Photo Credit hardwood floor texture image by GoodMood Photo from
Promoted By Zergnet


You May Also Like

  • How to Clean Glue Off of Wood

    There are a number of strong glues available for all kinds of different projects and they work amazingly well. The problem is...

  • How to Remove Excess Thin Set From a Tub

    When using thin set to apply tiles around a bathtub, drips and drops are inevitable. Thin set is made to hold tiles...

  • How to Remove 3M 4200 Sealant

    3M 4200 is a fast-cure, medium-strength, marine adhesive and sealant. It is commonly used on boats and watercraft. 3M Marine Adhesive Sealant...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!