How to Boost the Speed of Dial Up With Powernet 200
The Powernet 200 boosts Internet speed. It works by using the existing electrical wiring in a home or building. Powernet 200 filters electrical noise that slows down Internet connections. Everything that plugs into a wall outlet uses electricity, from clocks to washing machines to computers. When these devices are plugged in, they create a white noise within the electrical wiring system whether they are on or off. Powernet 200 plugs into the existing wall outlet and cleans up the electrical noise, which boosts Internet speed.
Other People Are Reading
Things You'll Need
- 2 Powernet 200 devices
- Ethernet cable
- Electrical outlet
- Modem or router
Instructions
-
-
1
Plug both Powernet devices into separate wall outlets. Plug in one near the Internet router or modem; plug the second one into an outlet close to the computer.
-
2
Check that the power signal lights up on both Powernet devices. This means they are communicating with each other.
-
-
3
Using an Ethernet cable, connect the first Powernet device to the modem or router. Then connect the second Powernet device to the computer using another Ethernet cable.
-
4
Turn on the computer.
-
1
Tips & Warnings
If the Powernet devices are in remote areas away from each other, plug them in close to each other at first to setup initial communication. Then move the second device into the other room.
Do not use outlets with surge protectors. They will prevent communication between the Powernet devices.
