How to Insulate Window Frames

Save

Framing a wall for a window includes making a header, sill and two sides to accommodate the window. Small cracks between the boards installed next to each other can leak air. There are also tiny air leaks between the window and the framework that need filling with insulation. Properly sealing these areas with a can of spray foam insulation will save you money on heating and cooling bills.

Things You'll Need

  • Rubber gloves
  • Safety goggles
  • Foam insulation
  • Metal putty knife
  • Wearing rubber gloves and safety goggles, insert the applicator in the nozzle of the foam insulation. Insert the applicator tip into the crack around the window frame where the metal frame meets the wood on the inside of the home. Press the nozzle to spray the insulation into the crack, starting at one corner and working across or down while moving the can. Fill the crack about one-half full of insulation.

  • Repeat this process on all sides of the window frame.

  • Let the foam insulation dry for about 10 minutes. Place a metal putty knife at a 45-degree angle to the exterior surface. Push the knife forward and back to cut off any excess insulation so it is flush with the window surface.

  • Insulate the exterior of the window in the same manner.

Tips & Warnings

  • Foam insulation doubles in size as it dries. Filling the cracks between the window and frame halfway allows the foam to expand and insulate the entire area.
  • Foam insulation may permanently stain clothing. Wear old clothes or work clothes when using this product.

Related Searches

References

  • Photo Credit Jupiterimages/Comstock/Getty Images
Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!