How to Open the Case on a Gateway 7422 Laptop

A laptop case can be removed to access internal parts of the laptop.

A Gateway 7422 laptop case can be removed to access internal parts of the laptop, such as the cooling fan and motherboard. The laptop case protects the internal parts from dust, debris and accidents. Only remove the case for cleaning and replacing parts. Opening the case can void the manufacturer's warranty. It should only be attempted by those familiar with computer systems. If you are unsure how to complete the removal process, a laptop repair technician can assist you.

Things You'll Need

• Electronic repair phillips head screwdriver

Instructions

1. Power off the Gateway 7422 laptop. Unplug the AC power adapter. Place the laptop upside down on a flat surface in front of you.

2. Remove the Gateway 7422 laptop battery. Slide the battery release while lifting the battery upward, out of the battery housing unit.

3. Use an electronic repair phillips head screwdriver to remove the four screws from the corner of the Gateway 7422 laptop. An electronic repair screwdriver is longer and skinnier than a normal phillips head screwdriver.

4. Remove the hard drive and memory card from the bottom of the Gateway 7422 laptop. Unscrew the screws holding them in place with the electronic phillips head screwdriver. Lift them away from the bottom of the laptop.

5. Gently lift up on the bottom of the Gateway 7422 laptop case. Pull it away from the laptop for removal.

References

• Gateway: Hardware Reference
• Iris Vista: How To Take Apart Toshiba Satellite A60/A65 Laptop And Replace The System Board.