Depending on the area, removing vinyl flooring can be an all-day job. Vinyl flooring is not difficult to remove but the adhesive that holds the flooring to the sub-floor is where the problem lies. Be prepared for hard work and make sure that you wear a dust mask. If you should use a chemical stripper, make sure you ventilate the area by opening all windows and doors.
Things You'll Need
- Asbestos test kit
- Dust mask
- Utility knife
- 5-inch flat putty knife
- Floor scraper
- Chemical stripper
Check your vinyl floor for asbestos if your vinyl floor was laid before 1970. Obtain an asbestos kit from your local hardware store or from the pharmacy. If the floor tests positive for asbestos, contact an asbestos removal expert. If the floor test negative for asbestos or your floor is newer than 1970, proceed to the next step.
Cut through the vinyl floor using a utility knife. Slice through the entire length of the floor every 6 to 12 inches.
Lift the vinyl floor from the sub-floor by sliding a 5-inch flat putty knife underneath each strip you cut in Step 2. Pull up the old vinyl floor and discard.
Strip away any remaining glue residue and vinyl from the floor using a floor scraper.
Use a chemical stripper designed to strip flooring adhesives for areas of glue the floor scraper fails to remove. Follow the instructions on the stripper container.
- Photo Credit wooden texture of the floor - ideal background image by Elnur from Fotolia.com
How to Remove Vinyl Flooring From Concrete
Before you begin the time-consuming task of removing the vinyl covering from your basement or mudroom floor, you should ask yourself whether...
How to Remove Old Vinyl Floors
After years of wear and tear, it may become necessary to replace old vinyl floors. Removing worn vinyl floors can be a...
How to Remove Several Layers of Vinyl Tile
If you're planning to replace some vinyl tile flooring in your house, you may have to remove several layers. It's not uncommon...
How to Glue Vinyl Flooring
Vinyl tile can be laid by most amateurs, but there are tricks to getting it done right when it comes to properly...