The Mercedes ML320 is an elegant car, built by one of the most prestigious car manufacturers in the world. Properly maintaining this car is essential to prolonging the life of the vehicle and upholding its resale value. Changing the oil and the filter every 3,000 miles will ensure that the engine runs at its peak performance. Note every oil change to help ensure that your car never misses an oil change.
Things You'll Need
- Socket wrench
- Socket set
- Drain pan
- Oil filter wrench
- 8 quarts of engine oil
- New oil filter
Park the car on a flat, level surface. Set the parking brake.
Locate the oil pan underneath the car. The oil pan is located at the bottom of the engine. Slide a drain pan underneath the engine to catch the used oil.
Unscrew the drain plug with a socket wrench. The drain plug requires a 13mm socket. Allow all the oil to drain from the oil pan (allow at least 10 minutes for all the oil to drain adequately). Tighten the drain plug to the oil pan with the socket wrench.
Open the hood to access the engine compartment. Locate the oil filter cap at the front of the engine. It will be positioned directly in front of the oil-fill cap.
Loosen the oil filter with an oil filter wrench. Pull the oil filter out by the cap. Ensure you have a pan to catch the excess oil dripping from the filter. Pull the old filter off the end of the stick, using an old rag--this will prevent from making a mess.
Insert a new filter onto the stick, pushing it in until it stops. Insert the filter/cap back into the oil filter housing. Screw the cap tight by hand.
Unscrew the oil cap located directly behind the oil filter housing. Pour in seven quarts of engine oil. Pull out the engine oil dipstick located by the oil-fill cap. Wipe the dipstick clean. Insert the dipstick back in to the tube. Pull out and verify the level. The level should be between the "minimum" and the "maximum" marks on the dipstick. If the level is below either of the marks, add additional oil in half-quart intervals. Check the level each time you pour the oil.
Start the car up and allow it to idle for five minutes. Turn the car off and let it sit for an additional five minutes. Check the oil level once more. Add more oil, if necessary.
Log the number of miles driven and the date the oil change was completed. Reference this for the next oil change interval.
Tips & Warnings
- Contact the local Mercedes Benz dealer for the recommended weight and type of engine oil. This may vary from region to region, due to weather and driving conditions.
- The Mercedes ML320 engine is designed to hold 7.5 quarts of engine oil.
- Contact your local recycling center or automotive-parts store for disposal of waste engine oil and old filter.
- Use caution when working under the car: Make sure that the parking brake is set and the vehicle is parked on a flat level surface.
- Photo Credit tool image by CraterValley Photo from Fotolia.com
- How Often Should You Change the Oil in a Mercedes-Benz?
How to Check Transmission Fluid in a Ml320 Benz
On many cars, checking the transmission fluid level is a two-minute process just like checking the engine oil level. But with the...
How to Replace the O2 Sensor on the ML320
The Mercedes Benz ML320 uses four oxygen sensors in the exhaust system. Before replacing all of them, have the dealer or other...
How to Remove the Center Console From a Mercedes Benz ML320
The center console in a Mercedes Benz ML320 contains the gearshift lever, cup holders and storage compartment. It can be removed for...
Check Engine Light Causes for an Ml320
The M Class built by Mercedes Benz in 1997 (1998 model year) has been one of Mercedes' best-selling SUVs in the world....
Mercedes ML320 Specifications
Launched in 1997, the first-generation M-Class represented Mercedes' effort to capitalize on the SUV boom of the 1990s. It combined the generous...
Types of Oil for a Mercedes Benz
Mercedes-Benz is a luxury car maker known for producing automobiles that combine style and excellent design with technology and performance. If you...