How to Program Zenith Universal Remote Codes

You can program your Zenith universal remote to control your DVD player.

You can typically program most universal remote controls using one of two methods. One involves automatically syncing the remote to an electronic device. The second involves programming your remote using device codes. Device codes for your Zenith universal remote are three-digit codes that are provided in the Zenith remote control user manual.

Instructions

1. Turn on the device you want to program, such as your TV or DVD player.

2. Look up the device codes for the device you want to control (see Resources section).

3. Press and hold the "Code Search" button on your Zenith remote until the indicator lights at the top of the remote turn on. The Code Search button is located on the upper-left side of the remote.

4. Press and release the device key, such as the "TV" key or the "DVD" key. These are located at the top of the Zenith remote.

5. Enter the three-digit device code. The indicator light turns off after you've entered the correct code.

6. Press the "Power" button in the upper-right corner of the remote. The device you are trying to control turns off.

References

• Remote Code List: Zenith Universal Remote Manual

Resources

• Read this Article in Spanish
• Remote Code List: Zenith Remote Codes