How to Understand Boat Wiring

Save

That latest upgrade to your boat's instruments or electrical system may leave you sitting in the middle of the lake, "dead in the water," because you didn't understand your boat's wiring. While each boat's wiring may vary slightly, the basic principles of boat wiring are the same. With a bit of effort, you can understand these principles, and with a bit more effort, you'll become a safer boater because your boat's wiring doesn't have to remain a mystery.

Things You'll Need

  • Boat owners' manual
  • Look at your boat's wiring diagrams, found in your owner's manual. You'll notice that, ultimately, the ground wires for everything are connected to the boat's common ground. The power leads for everything are connected to fuses before being connected to the common power buss--a block used to consolidate the positive connections in a single location that has a single lead to the battery.

  • Compare the wiring diagrams with what can be seen on the boat. Instruments--and other electrical or electronic bits and pieces--may be "daisy chained" together. The instrument light or power wire for one connects to the instrument light or power wire of another and another, before the last instrument connects to the common power buss, which is connected to the battery.

  • Write to your boat's builder or call your dealer if you have questions. The wiring diagram may show "Connection to starter" without showing how the starter is wired. Manufacturers' wiring diagrams are complete for the boat's wiring, but don't address the wiring of the engine or outboard motor.

Tips & Warnings

  • You can learn quite a bit about electricity and safe boat wiring by taking a course from the U.S. Power Squadrons, a nonprofit, educational and community service boating organization. Courses on Marine Electronics, which include basic electricity and boat wiring are available online and may be available in your area.

References

  • Photo Credit Wires image by Neil Farnworth from Fotolia.com
Promoted By Zergnet

Comments

You May Also Like

  • How to Wire Boat Lights

    Most recreational boats have 12-volt DC electrical systems, and the lighting industry has responded to boaters' needs for interior lighting with energy-efficient...

  • How to Wire Boat Electronics

    If you have the fish finder, the GPS and your marine VHF radio sitting in your garage, ready to install on your...

  • Basic Boat Wiring

    Basic boat wiring follows the same pattern for all sizes of boats. Any boat can be wired from scratch by different technicians,...

  • How to Wire a Fuse Block in a Boat

    Most boats have the an electrical system if the owner plans to operate at night. The system can be as simple as...

  • How to Understand Wiring Schematics

    Wiring schematics can be baffling if you aren't familiar with the basics of electronics, and using them without a full understanding can...

  • MerCruiser Starter Wiring

    The electrical connections for a MerCruiser starter motor are made on the solenoid. The solenoid is attached to the top of the...

  • Electrical Wiring Specifications for Boat Lifts

    Boat lifts raise and lower boats in and out of water. Most boat lifts are electrically operated and must be wired in...

Related Searches

Check It Out

10 Delicious Game Day Eats That Rival the Game

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!