How to Replace the Wiper Blades on a PT Cruiser


The wiper blades on your Chrysler PT Cruiser are necessary to clear your windshield when the weather is poor. Inspect your wiper blades regularly for any signs of drying or cracking. Replace the blades every year or sooner if they exhibit signs of wear. The PT Cruiser uses 21-inch wiper blades on both sides. Buy new wiper blades from an auto parts store.

  • Grasp the wiper arm and raise it to an upright position. The wiper should sit completely off the glass.

  • Flip the wiper blade backward so the rubber section of the blade is facing straight up. Locate the release tab beneath the wiper blade where it connects to the wiper arm. Push the tab down while you slide the wiper blade straight up off the arm.

  • Slide the new wiper blade onto the wiper arm until the retaining clip clicks, locking into place. Lower the wiper arm to the glass. Repeat the process on the opposite wiper.

Tips & Warnings

  • Avoid resting the wiper arm on your windshield without a wiper blade attached. If you need to rest the empty wiper arm on the glass, put a soft cloth between them to protect the windshield from scratches.

Related Searches


  • "2004 Chrysler PT Cruiser Owners Manual"; Chrysler Group LLC; 2003
  • "2007 Chrysler PT Cruiser Owners Manual"; Chrysler Group LLC; 2006
  • Photo Credit man working on car image by palms from
Promoted By Zergnet


You May Also Like

Related Searches

Check It Out

How To Travel For Free With Reward Points

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!