How to Program a Proscan TV

Proscan is a line of TVs owned and produced by RCA. As is the case with other televisions, you can program the stations into the memory of the Proscan TV so you are not constantly flipping through stations you do not receive. Programming is done directly into the Proscan TV and you do not need any additional hardware to perform the scan. You can run the Proscan TV programming option when connected to either a cable, satellite or antenna.

Things You'll Need

• TV remote

Instructions

1. Power on the Proscan TV and press the "Menu" button on the remote control. An options menu will appear on the TV screen.

2. Select the programming option and scroll down with the directional arrows until you find the "TV Scan" selection.

3. Choose "TV Scan" and select either "Cable" or "Antenna" (satellite falls under the cable option). The programming scan will begin.

4. Wait for the scan to finish. When asked if you want to keep the scan select "OK." Close out the menu and now when you flip through the stations on your Proscan TV you will only stop on stations your television receives.

References

• Wize: Best Proscan Plasma and LCD TVs