How to Make a Drying Rack for a RV Ladder

Save

While traveling in your RV, you will need to find solutions for laundering clothing and towels. If you prefer to line-dry some of your laundry, a portable drying rack can be constructed from sections of PVC pipe. This inexpensive solution attaches to the ladder of your RV and is ideal for air drying bath towels between uses. It can also be disassembled to store between uses.

Things You'll Need

  • Saw
  • Drill
  • 3 PVC pipes, 3/4 inch diameter and 10 feet long
  • 2 PVC end caps, 3/4 inch
  • 8 PVC tees, 3/4 inch
  • 6 PVC 90 degree elbows, 3/4 inch
  • 2 PVC 45 degree elbows, 3/4 inch
  • PVC pipe glue
  • 22 feet of plastic clothesline, minimum
  • Measure and cut the PVC pipe into sections of these lengths: 2 pieces, 2 inches long; 2 pieces, 3 inches long; 2 pieces, 22 inches long; 2 pieces, 28 inches long; 3 pieces, 7 inches long; 4 pieces, 8 inches long; 4 pieces, 12 inches long.

  • Glue a 90-degree elbow to each end of both of the 28-inch sections of PVC pipe.

  • Drill holes approximately 4 1/2 inches apart through the two sections that are 28 inches in length.

  • Glue a tee joint to the end of a 12-inch section. Insert and glue a 7-inch section into the tee joint. Glue a tee joint onto the other end of the 7-inch section. Insert and glue a 12-inch section into the tee joint. Repeat this step to form the fourth side of the base.

  • Connect the four sections to form a rectangle. Do not glue these sections. This will allow the drying rack to be disassembled for storage.

  • Tie a knot in one end of the clothesline. Pull the line through the first hole and thread it back and forth between the two PVC pieces.

  • Glue an end cap to a 2-inch section. Use a 90-degree elbow to join the 2-inch section to a 3-inch section. Add a tee joint to the end of the 3-inch section and glue all joints. Repeat this step to form two ladder hooks.

  • Insert the 24-inch PVC sections into the tee joints on each ladder hook. Attach to the tee joints on the back of the base.

  • Insert the 22-inch PVC sections into the tee joints on the front side of the PVC square.

  • Glue a tee joint to the ends of the 22-inch sections. Place an 8-inch section in each tee and attach a 45-degree elbow to the end of each 8-inch section and glue the joints.

  • Use the 7-inch section of pipe to join the remaining two tee joints.

Tips & Warnings

  • Hang the ladder hooks over a rung on your RV’s ladder to use the drying rack. Disassemble at the unglued joints for easy storage.

References

  • Photo Credit Jupiterimages/Comstock/Getty Images
Promoted By Zergnet

Comments

You May Also Like

  • How to Build Ladder Racks

    The stake pockets in pickup trucks vary from 1 1/4-by-2 inches to 1 1/2-by-2 1/2-inches. Knowing the dimensions of the stake pockets...

  • Installation of RV Covers

    Sunlight, snow and most weather in general can be damaging to your RV. Protect your motor home or travel trailer by covering...

  • How to Install an RV Ladder

    As recreational vehicles are homes on wheels with a limited amount of space, owners often try to utilize every part of their...

  • PVC Clothes-Drying Rack Projects

    For those who want to save energy and money by air drying their laundry, PVC clothes-drying racks can help. You can build...

  • Homemade RV Clothes Drying Rack

    Essential considerations regarding equipment and accessories used for RVs are versatility and portability. Many seasoned RV travelers enjoy a more simplified lifestyle,...

Related Searches

Check It Out

10 Delicious Game Day Eats That Rival the Game

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!