How to Remove an O2 Sensor on a Town Country

Save

The O2 sensor on the Chrysler Town and Country should last for at least 60,000 miles without failing. When the O2 sensor does fail, it will likely generate an error code and cause the check engine light to come on. This error code can be diagnosed easily at most auto parts stores free of charge. Replacement O2 sensors can also be purchased at most auto parts stores.

Things You'll Need

  • Floor jack
  • Jack stands
  • O2 sensor tool
  • Socket wrench
  • Jack up on the front jack point behind the radiator.

  • Place jack stands underneath the front pinch welds of the vehicle and lower the Town and Country onto the stands.

  • Climb underneath the Town and Country and locate the O2 sensor on the catalytic converter.

  • Unplug the electrical leads running to the O2 sensor.

  • Remove the O2 sensor by placing the O2 sensor removal tool over the end of the sensor and turning the sensor and removal tool counterclockwise with a socket wrench.

References

  • "Dodge Caravan, Chrysler Voyager, Chrysler Town & Country Repair Manual 2003-2006;" John Wegmann, John H. Haynes; 2006
  • Photo Credit Hemera Technologies/AbleStock.com/Getty Images
Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

How To Travel For Free With Reward Points

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!