How to Reset a Filter Life Warning Light in an Acura

When your filter life warning light comes on in your Acura, it's time to check the filter element. Once this has been replaced, you'll need to shut off the warning light. The light will stay on until you reset it, and disconnecting the battery does not typically reset the light. For this, you'll need a diagnostic reset tool available from any Acura dealership.

Things You'll Need

  • Diagnostic reset tool
Show More

Instructions

    • 1

      Open the fuse panel cover by turning the lock handle counterclockwise and pulling down on the panel cover.

    • 2

      Plug the pinned connector into the fuse panel slot marked for the diagnostic reset tool.

    • 3

      Turn the ignition key to the "II" position and wait for the light on the tool to stop blinking. When it does, your Acura's filter life warning light will go off.

Tips & Warnings

  • For specific information about your Acura's filter life warning light, consult the particular vehicle's manual (see Resources).

Related Searches:

Resources

Comments

You May Also Like

Related Ads

Featured