How to Build a 28X32 Cabin


Cabins offer a chance to get away from the accelerated pace of modern life. If you own a small piece of land, this sanctuary might not be as difficult to accomplish as you might think. In building a basic 28-foot-by-32-foot cabin, the sweat equity you invest will enhance the enjoyment of your new refuge.

Things You'll Need

  • Post hole diggers
  • Concrete mix
  • 2-by-4 and 4-by-4 beams
  • Plywood
  • Shingles
  • Exterior siding
  • Interior wall boards or drywall
  • Carpentry tools

Building the Cabin

  • Use fluorescent tape to define the area where you intend to build. This will ensure that you are building the cabin to the proper dimensions while also giving you an idea of where it will be situated on the lot.

  • Establish a sound foundation by digging post holes about 18 inches deep to ensure stability for the cabin. The holes must be large enough for a 4-by-4 beam and the concrete you will add later. Sink the poles so that they stand vertically, leaving at least eight feet from the ground to the end of the beam.

  • Pour quick-drying concrete around each of the foundation beams. Make sure a helper stands with each beam while the concrete sets to make sure it stays plumb. A beam that sets out of line will be useless, and you'll have to remove and replace it.

  • Nail 2-by-4 beams as cross sections between the upright 4-by-4 foundation posts. This is the frame for the flooring system. It must be solidly in place in order to provide adequate support for the vertical frame that directly ties into it. It also is the support for the flooring itself: sheets of plyboard that you will nail to the 2-by-4 framing beams.

  • Raise the cabin's vertical frame to eight feet. Use 2-by-4 studs to accomplish this, locating them about 36 inches apart in order to ensure a sound structure.

  • Build a pitched roof system by jointing joists to a center roof beam. Position these joists in 36-inch intervals, similar to the wall studs. These joists also will be 2-by-4 beams.

  • Nail high-quality plyboard into place on top of the roof. Attach shingles on top of this surface to enhance the cabin's protection from the weather.

  • Attach exterior siding to the wall frames. You can choose shakers, individual clapboard boards or a more affordable synthetic siding. Aesthetic preference will determine your choice.

  • Hang the interior walls. For a traditional look, nail tongue-in-groove boards into place. Or use drywall for an attractive and long-lasting alternative.

Related Searches


Promoted By Zergnet



You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!