How to Fix a Sinkhole in a Lawn

Sinkholes are places where the ground has collapsed into an opening formed underground. Large sinkholes form by water dissolving a type of rock known as carbonate (limestone, dolomite) or evaporite (salt, gypsum). Smaller sinkholes can be formed by water draining through pavement and washing away soil underneath, or the decay of a large tree stump that was not removed with a tree. Sinkholes can be a nuisance or a disaster, but they need to be fixed, because the potential is even worse than the problem at hand.

Difficulty:

Moderate

Instructions

Things You'll Need

• Shovels or backhoe Trench forms Rocks and gravel Sand Landscape cloth Topsoil Tree root removal equipment or chemicals Water pipe repair equipment

1. This limestone has been pitted and eroded by water.

   Find the cause of the sinkhole. If the ground has collapsed due to decaying old tree roots or subsoil being washed out by water running from a broken water pipe, or from a driveway or walk without the proper base material, you can probably fix the sinkhole by excavating the tree roots or tearing up the pavement and re-laying it with the proper gravel base, then filling the hole. If, however, your sinkhole is due to dissolving substrata rock, you'll need some professional help.

2. Dig until you find the hole or holes the soil's washing down.

   Excavate the sinkhole. Dig clear down until you reach the sublayer of rock beneath the soil. If you have to dig deeper than a foot or two, you'll need a trench form to hold back the sides of the excavated area. If you reach a tree stump or broken water main, you're in luck; dig out the stump or repair the pipe, and fill the hole. If, however, you reach rock and find a hole or channel that you can look down, call the city or county--whoever deals with sinkholes in your jurisdiction--and consult them about continuing to dig.

3. This Florida sinkhole has become a neighborhood swimming hole.

   Fill the void so no further erosion occurs once the sinkhole has been completely excavated. Start with a few large rocks across any holes and a thick layer of large 4- to 6-inch round rocks. Add a similar layer of smaller rocks. Finally, top the rocks with a layer of coarse gravel until the hole is filled just about to the level of the subsoil, the sandy level just below the dark topsoil.

4. 

   Put down a layer of landscaping cloth over the gravel to keep the sand and soil from washing down through the rock layer, and fill to the top of the subsoil layer with sand. Tamp down the sand, and fill the remaining hole with topsoil. If you're using a trench form, pull it up as you fill the hole.

5. Don't ignore sinkholes--they can grow and endanger structures on your and your neighbors' property.

   Check the area for further sinking for a few days---the soil will settle a bit but should not settle to the level of the sand. Continue filling until the topsoil has settled and you can seed or sod the area. If the sinkhole opens again, consult a geologist or your municipal or county utility. You may have a larger problem than can be solved by a truckload of rock. If you live in "karst" areas---areas where subterranean rock is subject to erosion---let a professional check to make sure that your problem does not potentially endanger structures in the vicinity.

Tips & Warnings

• If you think you're out of your depth, especially if you live in an area where geologically based sinkholes are common, consult a geologist before excavating large holes. You may not be able to solve the problem yourself. You may even make it worse. Sometimes a broken water pipe is just the beginning of the sinkhole. Make sure that water hasn't scoured out a larger hole or that the waterline break is not the result of sinking soil underneath it.

• When you notice the sinkhole--certainly before digging--call Diggers Hotline to locate gas, water, and electric lines.

Resources

• Read this Article in Spanish
• USGS Geology Lessons and Activities