How to Make a Sled From Skis

Skis have many uses. They may help people navigate snow-covered areas that may not otherwise be accessible. They may help people exercise very effectively. They can also be used to make a sled. If you have an outdated or outgrown pair around, you can turn them into a very nice sled that will go fast down hills.

Things You'll Need

• Skis
• Plastic sled
• Measuring tape
• 1-inch screws
• Foam padding

Instructions

1. Clean the skis thoroughly. Use soap and water to get rid of any dirt. This will make working with the skis easier.

2. Turn the plastic sled upside down. Using a measuring tape, make a point about 3 inches from the top lengthwise on each side of the sled. This is where the skis will go.

3. Place the skis against the sled. The front of the skis should jut out at least 4 inches from the back of the sled.

4. Screw two screws per ski into the sled to attach it to the sled. Use screws that are at least 1 inch in diameter. This will help insure the skis stay tightly attached to the sled.

5. Glue foam padding to the inside of the sled for a smoother ride. This will help support the weight of any passengers.