How to Troubleshoot GE Appliances


It can be difficult to know how to troubleshoot GE appliances simply because GE creates so many different types of appliances that are used in homes and businesses. Despite this, there are some basic things that can be checked for on each of these appliances if there is a problem with the power supply.

Things You'll Need

  • GE appliances
  • Voltage tester
  • Troubleshoot the power supply for any GE appliance by first checking with the breaker or fuse box. Sometimes it can appear that the breaker has not been tripped, even though it is actually located in the middle area. Be sure that the breaker is switched all the way to the right before pushing it back over to the left. A large amount of power supply problems stem from problems with the breaker.

  • Make sure that the the GE appliance is plugged into the proper outlet. Use a voltage tester to find out how much voltage an outlet gives out. This is especially important for electric dryers, which need a dedicated 220 volt outlet. Trying to use anything else will likely cause problems and could short the system.

  • Check the doors. To troubleshoot GE appliances such as washers, dryers and dishwashers, it is important to make sure that all of the doors to these appliances are properly latching closed. A door that is not latched when it closes will likely not have a complete circuit for the power supply to run through. Simply push on the doors and gently tug on them to see if they have latched into place.

  • Check the displays. GE appliances that have digital displays will often give the appliance owner clues about what might be causing the problems with the power supply. For example, if the power has gone off and come back on, some appliances need to be reset. Check the displays on microwaves, ovens and stoves for a "PF" symbol or a display of "8888." Simply touch "Clear" on the keypad to reset these appliances.

  • Listen for clicking noises from refrigerators. If there has been a power shortage, the compressor on a GE refrigerator will try to re-start itself. This noise will likely last about 3-5 minutes. Wait for the noise to stop before deciding whether or not the refrigerator has something wrong with the power supply.

Related Searches

Promoted By Zergnet



You May Also Like

  • Who Manufactures Hotpoint Appliances?

    HotPoint is a low cost brand of appliances sold at many major retailers throughout the United States. The brand offers entry level...

  • How to Troubleshoot General Electric Dishwashers

    Dishwashers are appliances that work in the kitchen to clean dishes. It has rules to govern its use and when those rules...

  • How to Troubleshoot GE Refrigerators

    General Electric refrigerator models include the top freezer, bottom freezer, side-by-side and compact. To fix a minor problem, you can use basic...

  • Appliance Recall List for Sears

    Sears sells a wide range of products manufactured by several companies. Occasionally a product sold by Sears is defective in some way....

  • GE Appliance Specifications

    General Electric appliance specifications differ greatly, not only between appliance types but between variations of appliances within each type. Compiling full descriptions...

  • General Electric Refrigerator Troubleshooting

    Most refrigerators need to be repaired at some point, and General Electric refrigerators are no exception. General Electric refrigerator troubleshooting requires limited...

  • GE Oven Troubleshooting

    General Electric (GE) appliances have been around for generations, with the first full cooking line appearing in 1907. In addition to cookware,...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!