How to Program a Sharp Universal Remote

Programming a Sharp universal remote device can serve as a great replacement asset for your television. Universal remote controls allow you to easily obtain a comparable remote without the hassle of spending lots of money on shipping and factory brand product. Universal remotes can usually be purchased in many major department or electronic stores. This article will show you how to easily program your Sharp universal remote in an adequate amount of time.

Difficulty: Moderately Easy

Instructions

Things You'll Need:

• Sharp universal remote Sharp universal remote manual 2 AA batteries

How to Program a Sharp Universal Remote

1. Locate the programming code for your device if you do not have access to it. You can do so by conducting a "Component Code Search." You will need to turn your television on and aim the universal remote control at the television.

2. Press the "TV" button on the top of the remote control. Press and hold down the "Code Set" button located directly in the middle of the top of the remote control. When the red signal light begins to flash, let the button go.

3. Slowly key in the numbers "9", "9", "1" on your Sharp remote control keypad. The red signal light should blink each time you key in a number. (This is the stationary code for Sharp Universal Programming.) Press the "Power" and "TV" buttons slowly. Alternate between the two buttons repeatedly until the television screen powers off. When it does so, this is your indication that the device is now ready to be programmed.

4. Leave the television off before proceeding. Press the "Code Set" button at the top of the remote control to configure and finalize locking the code into the television. Press the "Power" button on the remote control device, and the television should power on as well. Browse through the television channels and configure your remote and television settings to ensure the device is functioning properly.

Tips & Warnings

• Write down the Sharp Universal Programming code and keep the code for your personal records in the event you need it at a later date. Be sure you have fully charged batteries when programming your remote to ensure the procedure is configured properly.
• Use only those batteries that are both brand and durability compatible.

Resources

• This site can serve as a reference manual that will assist you in retrieving your programming codes if you have trouble locating them.

[daydreamgalaxy]

on 7/15/2009 Thanks for the article! 5*s and Rec.