How to Engrave the Inside of Titanium Rings
You can to engrave your own design or special words on the inside of a titanium ring by yourself. The process is moderately complicated and probably should be observed before trying it. The engraving machine can cost several thousand dollars, which might be worth it if you plan on making a business out of your craft. Otherwise, consider leaving this process to a jeweler. If you want to have a try, you will need special tools to accomplish the engraving. Does this Spark an idea?
Instructions
-
-
1
Place the ring on the preset rotary axis of the engraving machine.
-
2
Make sure that the design to be engraved is in the required software format for the engraving machine. Limit engraving to 32 characters for best results.
-
-
3
Set the resolution properly. Most laser engraving machines can handle designs of up to 1,200 dots per inch or dpi. It is advisable that the finished engraved product have at least 300 dpi resolution. This amount of dpi will keep the design large enough to read.
-
4
Set the laser to the proper focus, speed and power. Generally, 50 watts of power are used; however, follow the manufacturer's instructions.
-
5
Have a proper exhaust system in place. The laser releases gases as the engraving proceeds.
-
6
Run the program and engrave the ring.
-
7
Take care when handling the finished product. When the engraving is complete, the material may be hot.
-
1
Tips & Warnings
The laser beam is a common technique used when engraving a titanium ring. The laser uses a highly focused beam of light to etch markings into the titanium. Laser engravings allow more precise and defined markings in rings.
