How to Replace the Wiper Blades on a Chevy Camaro

When it comes to driving in adverse weather conditions, you must make sure you have windshield wipers that are in proper working order. Without being able to clear rain, sleet and snow from your windshield, you are putting yourself, passengers and other drivers at risk. Here's how to replace the wiper blades on your Chevy Camaro in just a few minutes.

Things You'll Need

• Chevy Camaro wiper blade replacement kit

Instructions

1. Raise the wiper arm away from the windshield until it locks into the service position.

2. Hold down the locking tab, while simultaneously sliding out the old blade. Once the old blade has been removed, you may discard it. The wiper arm will look as if it is made up of two "claws."

3. Find the heel of the wiper blade arm. You'll notice that it has two notches on it which is held by the wiper blade claw.

4. Grasp the wiper blade with one hand, while gently sliding the new wiper blades along the wiper arm track.

5. Continue sliding until the new wiper blade aligns properly with the wiper arm claws. You'll feel the wiper blade lock into place.

6. Repeat this process on the other wiper blade of your Chevy Camaro to complete the job.

Tips & Warnings

• Note that the Chevy Camaro is currently out of production until the 2011 model hits the market. This guide refers to the most recent model of Chevy Camaro which was manufactured from 1993 until 2002. This is considered the fourth generation Chevy Camaro.

• Chevy also notes in their owner's manual for the Camaro that wiper blades not produced by Chevy may be installed differently than the above instructions. Buying your blades from the dealer will ensure that your owner's manual will tell you how to properly install them on your Chevy Camaro.