How to Make 3D Glasses


All you need to enjoy classic 3D media is a pair of bi-colored 3D glasses. From the 1950s until the early 2000s, all 3D productions used "anaglyphic" 3D, requiring viewers to wear one red lens and one blue lens. You can make your own pair of 3D glasses, then watch the creatures jump out at you from your old 3D videos or online streaming services.

Make your own 3D glasses!
(Jeff Farris)

Things You'll Need

  • Printed template
  • Glue stick
  • Paperboard
  • Scissors
  • Hobby knife
  • Clear tape
  • Red acetate
  • Blue acetate
  • Template (See Resources)
Step 1

One of each sheet of acetate will make several pairs of glasses, so you can equip the whole family. Please see the last slide for an itemized list of tools and materials. You will find a link to the template for this project under Resources at the end of this slideshow.

Materials for 3D Glasses.
Jeff Farris
Step 2

Download the 3D glasses template. Print it and cut roughly around each element.

Download, print and rough out pattern.
Jeff Farris
Step 3

Stick the templates on a piece of paperboard with a glue stick. Cut along the outline with a pair of scissors and cut the lens openings out with a hobby knife. Make sure to protect your worktable when using the hobby knife.

Cut parts from paperboard.
Jeff Farris
Step 4

Peel the templates off the paperboard frames and temples. Cut pieces of the acetate sheets slightly larger than the lens openings.

Cut lenses from acetate.
Jeff Farris
Step 5

Tape the red acetate lens over the left eye. Tape the blue acetate lens over the right eye. Stretch the acetate slightly as you tape it down to avoid wrinkles.

Tape lenses in place.
Jeff Farris
Step 6

Attach the temples to the frames with tape. Use a piece on both sides to create a sturdier joint. Try the glasses on and adjust the temples for a comfortable fit.

Tape temples to frame.
Jeff Farris

Related Searches

Tips & Warnings

  • Supervise children when using sharp tools.
Promoted By Zergnet



Related Searches

Check It Out

DIY Wood Transfer Christmas Ornaments

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!