How to Remove an Oil Pump on a Jeep Wrangler


This is the basic way to change the oil pump in a jeep wrangler.

Things You'll Need

  • Tools
  • Jack
  • wooden block
  • Disconnect negative battery cable.

  • Raise and support vehicle at side sills.

  • Drain oil.

  • disconnect exhaust pipe at exhaust manifold.

  • Disconnect exhaust hanger at catalytic converter and lower exhaust pipe.

  • Remove starter.

  • Remove flywheel access cover.

  • Position jack and wood block directly under vibration damper.

  • Remove through bolts from engine mounts.

  • Raise engine to remove oil pan retaining bolts.

  • Remove oil pan by sliding it to rear.

  • For oil pump remove....remove mounting bolts and oil pump.

Tips & Warnings

  • DO NOT move oil pick up pipe in pump body
  • If oil pick up pipe is moved, pick up pipe MUST be replaced to ensure an air tight seal.
Promoted By Zergnet


You May Also Like

Related Searches

Read Article

How to Clean Your Car Headlights

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!