How to Create an Anatomical Splint
One first aid technique for broken bones and strained, sprained or dislocated joints is the anatomical splint. This technique requires only strips of cloth and a similar uninjured body part (leg to leg, finger to finger). The following steps will guide you in making an anatomical splint.
Other People Are Reading
Instructions
-
-
1
Assess the situation. Take note of any wounds and care for them before applying the splint.
-
2
Acquire at least 2 strips of cloth or tape, depending on the size of the injured body part. Tear a shirt or towel to create the needed strips, if needed. Belts or neckties can also be convenient to use.
-
-
3
Place the strips of cloth under both the injured and uninjured body part. Place at least 1 strip above the injury and at least 1 strip below the injury.
-
4
Check for circulation. The ties should be snug and secure but should not cut off blood flow.
-
5
Tie the strips of cloth snugly around both body parts, securing the injured body part to the uninjured body part.
-
6
Wait for medical help to come to you, if possible. If necessary, carefully transport the injured person to safety.
-
1
Tips & Warnings
If the body part is small enough, such as a finger, use tape instead of strips of cloth.
Be sure to not tie the splint over the top of the injured area. This can cause further injury.
