How to Connect the Sony DVP-S9000ES SACD/DVD Player to an Amplifier

Contributor

By eHow Contributing Writer

Article Rating: (0 Ratings)

To enjoy DTS or Dolby Digital surround sound while playing DVDs and music on your Sony DVP-S9000ES SACD/DVD Player, you will need to connect the Sony DVP-S9000ES SACD/DVD Player to an amplifier or receiver. There are three different ways to do this.

Difficulty: Moderately Easy

Instructions

Things You'll Need:

Sony DVP-S9000ES SACD/DVD Player
Amplifier

Use an RCA Cord

Step 1

Use an RCA audio connecting cord. This is the most common type of audio cable. It will have a red plug and a white plug on each end (and possibly a yellow plug as well for video).
Step 2

Insert the RCA audio connecting cord into the back of the Sony DVP-S9000ES SACD/DVD Player. Find an open set of right and left jacks labeled Audio Out. Insert one of the red plugs into the R jack and the corresponding white plug into the L jack.
Step 3

Connect the other end of the RCA audio connecting cord to the amplifier. Find the corresponding Audio In jacks on the amplifier. Insert the other red plug into the jack for Right Audio In and the other white plug into the jack for Left Audio In.

Use a Coaxial Digital Connecting Cord

Step 1

Insert one end of the coaxial digital connecting cord into the back of the Sony DVP-S9000ES SACD/DVD Player. Plug it into the jack labeled Coaxial for Digital Out.
Step 2

Connect the other end of the coaxial digital connecting cord to the amplifier. Insert it into the corresponding Coaxial for Digital In jack on the amplifier.

Use an Optical Digital Connecting Cord

Step 1

Insert one end of the optical digital connecting cord into the back of the Sony DVP-S9000ES SACD/DVD Player. It goes in the jack labeled Optical in the Digital Out section.
Step 2

Connect the other end of the optical digital connecting cord to the amplifier. Plug it into the Optical jack for Digital In on the amplifier.