How to Install a wireless security camera inside your home

Home security cameras are increasing in popularity every year. As the culture of crime increases, people feel strongly lead to increase security in their homes for the sake of their families and personal property. If you have decided that a wireless home security camera will suit your needs, follow these instructions for installation.

Instructions

1. Decide what room you will be installing the camera.

2. Decide the best angle for the camera.

3. Decide how high off the floor the camera needs to be.

4. Find the mounting bracket that came with the camera.

5. Hold the mounting bracket in place with one hand and use a pencil to mark the screw holes with the other hand.

6. Determine if the screw holes will be in a stud. Use a stud finder from a home improvement store if necessary.

7. If you will not be screwing the screws into a stud, you will need to use a drywall anchor bolt.

8. Use a drill bit that is slightly smaller that the screw you will use to mount the bracket.

9. Predrill a hole into the stud or insert the drywall anchor bolt into the drywall.

10. Hold the mounting bracket in place and insert the screws into the predrilled holes or the drywall anchor bolt.

11. Place the camera onto the mounting bracket.

12. Plug the camera into the outlet or insert batteries, depending on whether or not your camera is corded or uses batteries.

13. Sync the camera to the base station following the manufacturer's directions.