How to Change a Bathroom Light Fixture

Lighting has a terrific impact in every room and should be considered whenever you are redecorating. One sure way to refresh the look of your bathroom is to replace the light fixture.

Things You'll Need

• Screwdriver
• Ladder or step ladder (optional)
• Mounting screws
• Insulated pliers

Instructions

1. Turn off power to the electrical box.

2. Remove the old fixture: Begin by removing the bulbs and shades.

3. Disconnect the wires from the old fixture.

4. Make sure 3/4 inch of copper conductor wire is available; twist the line wire end with the fixture wire. Screw a wire nut over the twisted ends to secure the connection.

5. Insert the mounting screws into the attachment holes by turning a few times to secure. Mount the fixture and rotate to secure it.

6. Tighten the screws of the fixture. Finish the installation with the bulbs and shades.

7. Turn the power back on to the electrical box.

Tips & Warnings

• Be sure to support the new fixture before it is fully attached to avoid strain on the wiring.

• If wires or insulation in the electrical box are brittle or frayed, call an electrician.

• Be sure to connect black wire to black wire and white wire to white wire.