How to Build a Salt Spreader


Managing snow and ice can be a major winter chore, especially if harsh winter weather is a fact of life in your community. One conventional tool for keeping driveways and sidewalks safe and clear is coarse rock salt, which reduces the melting temperature of ice and causes it to melt on freezing cold days. Spreading salt is simpler with a salt spreader, which can hold enough salt to cover a large area evenly.

How to Build a Salt Spreader
(Tyler Grove/Demand Media)

Things You'll Need

  • Plastic pail with locking lid
  • Electric drill with 1/4-inch bit
  • Scrap lumber
  • Screwdriver
  • Metal drawer handle
  • 2 galvanized steel screws
Step 1

Select a plastic pail with a snap-on or screw-on lid, such as an old paint or food container. Remove the lid and clean out the pail with a rag.

Tyler Grove/Demand Media
Step 2

Place the lid upside-down on top of a flat piece of scrap lumber. Drill about 12 holes through the lid, spaced evenly apart, using an electric drill with a 1/4-inch bit.

Tyler Grove/Demand Media
Step 3

Hold a metal drawer handle against one side of the pail, as close to the center as possible. Drive in two galvanized metal screws through the holes in the handle and the plastic wall of the pail, to hold the handle to the pail firmly.

Tyler Grove/Demand Media
Step 4

Fill the pail with rock salt by scooping the salt out of a larger pail or plastic bag just before using it. Attach the lid firmly before use to avoid spills.

Tyler Grove/Demand Media
Step 5

Rinse out the spreader after every few uses to prevent residue that can damage the plastic and metal components.

Tyler Grove/Demand Media

Related Searches


Promoted By Zergnet


Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!