How a Shop Vac Works

Save

Basic Operation

  • All vacuum cleaners operate on the same basic principle which by lowering air pressure a vacuum is created. Air pressure is lowered by an electric motor-powered fan that sucks air into the cleaner's intake port or hose. The vacuum effect pulls in air and particles into the intake port and is held within the cleaner's containment system, usually in the form of a canister or bag. The air intake is filtered as it passes through the containment system and exits through the fans exhaust port.

Wet/Dry Systems for Workshops

  • Workshops present many challenges that an ordinary household vacuum cleaner would not be able to handle effectively. Liquid spills or large particles, such as sawdust, cannot be contained well enough by the standard bag system. Shop vacuums, also known as wet/dry vacuums, are designed to better contain these elements without fouling the fan motor or clogging vacuum bags.

    The fan motor is mounted over a bucket-type canister and pulls air in through the intake. The flow of air through the narrow intake hose slows down as it enters the wider bucket, diminishing the vacuum effect to allow liquid and particles to drop into the bucket without entering the fan. The bucket design allows the user to remove the lid and empty the contents when needed.

Ratings

  • Shop vacuums use several different ratings to describe performance details. Horsepower reflects the peak power output of the motor. However, horsepower ratings are typically outside the vacuum cleaners normal operating range and may not indicate actual air performance. Sealed Pressure (SP) is measured by how far a vacuum motor will lift a column of water within a sealed a glass tube. Maximum suction pressure is obtained at zero air flow with pressure decreasing as air flow increases. Cubic Feet Per Minute (CFM) measures the quantity of air moved by the vacuum motor while in operation. CFM can be affected by clogged or dirty filters, which reduce the flow of air and decrease suction.

References

Promoted By Zergnet

Comments

You May Also Like

  • How to Remove the Impeller on a Shop Vac

    The impeller (an industrial fan design used to increase or decrease air pressure) is a vital part of any vacuum, shop or...

  • How to Drain a Shop Vac

    Shop Vacs are designed to be easy to drain, no matter the model, and the process is simple. Once the tank is...

  • How to Repair a Shop Vac

    A Shop Vac is a useful tool for any home or office. Shop Vac has a large product line that serves both...

  • How to Clean Gutters

    If you do bring a bucket up the ladder don't try holding it with one hand while you clean the gutter with...

Related Searches

Read Article

5 Small Entryway Decorating Ideas

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!