How Does a Guitar Work?

Save

The Strings

  • Like any instrument, the guitar produces sound from vibrations. Just like wind instruments vibrate from air blown through them, guitars vibrate because of taught strings that are plucked by the player. The strings transfer vibration to the wood of the instrument, which projects the vibration as sound. The strings are made of metal, usual steel with a small coil of nickle or bronze wrapped rightly around the four bass strings. (There are normally only three wrapped strings on an electric guitar.) The thin strands of metal are stretched tightly across the guitar neck and supported by a piece of bone or plastic on the neck called the nut, and by a bone or metal piece on the body of the guitar called the bridge. These pieces prevent the strings from vibrating except in the distance between the nut and bridge, allowing the strings to be precisely tuned.

The Body

  • When the strings are plucked, they vibrate along their entire length in a certain frequency--the pattern of vibration that produces a musical note. But the sound produced by the strings alone is not loud enough to be heard among other instruments, so the guitar body amplifies the sound. The body of an acoustic guitar is made of up to six pieces of wood that make a box shaped like a gourd. The wood pieces are very thin and usually made of a soft coniferous wood like spruce or cedar, though many employ mahogany and other tropical woods. The thin pieces pick up vibrations very easily, and the box shape lets the wood transfer the vibrations to air inside the guitar, creating sound. The vibrating air is then forced out of a hole in the top of the body, and the sound is amplified outside of the guitar.

Making Musical Notes

  • The strings are able to be tuned to certain notes because of their limited length, so all that is needed to make different notes is to change the length of vibrating string. The guitar uses frets, thin pieces of metal attached the the guitar neck, to limit string vibrations. When a player pushes a string down just behind a fret, the metal stops the string from vibrating behind it, changing the frequency and the musical note produced. Very exact calculations and measurements are needed to arrange the frets, since very slight maladjustment can cause the guitar to play out of tune. When made correctly, however, frets allow any note to be played in any combination.

  • Photo Credit Photo by Clara Natoli
Promoted By Zergnet

Comments

You May Also Like

  • How Electric Guitars Work

    Learn some great tips on electric guitars and how they work and are used in this free video clip on amplification and...

  • How Guitars Make Sound

    Guitars make sound through vibrations made by plucking their strings. Vibrations bounce off of the hollow walls of the guitar's body to...

  • How Does a Distortion Pedal Work?

    A distortion pedal for a guitar has controls for volume, tone control and gain, which can be used and mixed to create...

  • How Do Amplifiers Work?

    A guitar amplifier amplifies the sound of a guitar, and it typically has controls for altering volume, treble, mid-range and bass controls....

  • Definition of Guitar Parts

    There are many different types of guitars, but they all have a similar structure that consists of a headstock, tuning pegs, a...

  • How Metronomes Work

    Metronomes work on the basis of a pendulum that rocks back and forth in order to keep time. Find out why the...

  • How Do Guitar Foot Pedals Work

    A foot pedal controls how much sound goes into an amp and the sound of the guitar with band graphic equalizers. Experiment...

  • How a Guitar Cable Works

    Guitar cables connect a guitar to an amp or bass in order to help it render sound to the masses. Set up...

  • How Does a Guitar Strap Hook to a Guitar?

    A guitar strap helps you balance your instrument and frees your hands for playing. Attach a guitar strap correctly with the help...

  • How an Acoustic Electric Guitar Works

    An acoustic electric guitar has an electric pickup system. Find out how acoustic electric guitars work with the help of a professional...

  • How Does a 6-Way Rotary Switch Guitar Work?

    A 6-way rotary switch guitar works in a very specific way. Learn how a 6-way rotary switch guitar works with help from...

Related Searches

Check It Out

12 Tiki Essentials to Turn Your Bar Cart Into a Tropical Paradise

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!