Difference Between Slow Blow & Time Delay Fuse

Save

Invented in 1890 by Thomas Edison, fuses protect wiring and equipment from overheating by breaking the circuit (blowing) when the current in that circuit exceeds a specific rating. Fuses are not "shock protection" devices.

Purpose

  • When current exceeds a fuse's current rating, the link inside melts, breaking the circuit. This prevents fire hazards that result overheating or equipment damage from "over-current" situations.

Slow-Blow Fuses

  • Slow blow (time delay) fuses have built-in time delay features that prevent them from blowing during intermittent current surges (large motors, air conditioners and dryers). Time delay fuses blow under constant or repeated current overload conditions.

Fast-Acting Fuses

  • Regular and fast-acting fuses blow instantaneously--they protect lighting, electronic and other household circuits. Equipment on these circuits is sensitive to current surges.

Considerations

  • Slow blow fuses should be used in circuits requiring sudden starting surges (motors, dryers and air conditioners). Fast-acting fuses should be used in motor circuits will blow more frequently.

Examples

  • If a circuit has a current rating of 15 amperes and a voltage rating of 120 volts, then the current rating should not exceed 15 amperes and the voltage rating should be "at least" 120 volts. It is OK to replace fuses with higher voltage ratings than the original fuse.

Warnings

  • When replacing fuses, never exceed the current rating and use at least the voltage rating of the fuse being replaced; follow manufacturer's recommendations. When in doubt, check with a licensed electrician or appliance technician for advice. Never try to modify electrical circuits.

References

Promoted By Zergnet

Comments

You May Also Like

  • Electrical Fuse Identification

    While it's not that complicated to correctly identify electrical fuses, it is an activity that requires attention to detail when going about...

  • Difference Between Ceramic & Glass Fuses

    A fuse protects electrical appliances and equipment by breaking the electrical circuit in the event of an overload of current or a...

  • What Is the Difference Between ATC & ATM Fuses?

    A fuse is used in an electrical circuit. Its purpose is to either protect a source of power or protect the electronic...

  • How to Buy Fuses

    When purchasing a replacement fuse, the easiest way to get what you need is to bring the old fuse with you. Fuses...

  • How to Identify a Glass Fuse

    Replace blown fuses with the correct size and type of fuse. Glass fuses are one of many types of fuses available on...

  • Types of Fuse Boxes

    Electrical service panels distribute electricity to a building through fuses. Because of the advancement in technology, there have been several different styles...

  • What Are the Different Types of Fuses?

    Older homes or wiring systems may still rely on fuses as part of the electrical system. The most important aspect of fuse...

  • The Difference Between MDL & AGC Fuses

    Fuses operate within an electrical circuit to monitor the amount of amperage traveling the circuit. Electronics from vehicle computers to home stereos...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!