Problems With Wah Pedals
Owning a Wah-Wah pedal can add a new dimension to your guitar playing. Though using a Wah pedal in rehearsal or on a gig can be fun, dealing with a malfunctioning or broken pedal can be an unnecessary problem. Learning how to diagnose and fix simple problems with your Wah pedal can save you both time and money, and teach you about the mechanics of your pedal at the same time.
Other People Are Reading
-
Squeaks
-
Sometimes a Wah pedal will squeak when it is being used. This can be fixed by spraying WD-40, or similar product, on the gears located just under the top of the foot rest.
Broken Belt
-
If the pedal feels loose when you push it down, or it will not pop back up then you may need to replace the belt that connects the foot rest to the mechanics of the pedal.
-
Buzzing
-
If you are experiencing a buzzing sound from your pedal this could mean that the input or output jacks or inside of the pedal need to be cleaned out. Try blowing air, or using a vacuum on low power, to clean out the jacks and inside of the pedal.
No Sound
-
If there is no sound coming from your amp once the pedal is plugged in, this may indicate that either the battery or AC adapter is malfunctioning, or that the input/output jacks need to be repaired or rewired.
Broken Switch
-
If the Wah pedal is stuck in either the on or off position, and pushing down on the pedal will not change it, this could mean that your on/off switch is broken and needs to be replaced or repaired.
-
Resources
- Photo Credit www.stockvault.net
More Like This
Comments
-
iceturtle
Oct 06, 2009
Hello i have a crybaby 535q wah pedal. When i plug cables, in bypass mode clean sound is coming correctly but when i click the button, no sound is coming. I changed my battery with a new one and also i tried with an AC adapter but it didn't work. What is causing this problem?
