There are different types of glycol; ethylene glycol and propylene glycol, both primarily used for deicing solutions and antifreeze. To prevent cracking, shrinking and warping, green wood is treated with the chemical polyethylene glycol or PEG, according to the Lee Valley & Veritas website.
Polyethylene glycol (PEG) is soluble in water, non-flammable and non-toxic and is a waxy white substance that is solid at room temperature. PEG comes in either flake form or solid blocks and two molecular weights: 1450 and 1000. PEG 1450 melts at 1100 F to 1150 F and absorbs into wood more slowly due to the higher molecular weight. PEG 1000 melts at lower temperatures, 980F to 1030F, and may bleed from the wood in hot, humid conditions.
PEG works most effectively on high-moisture content green wood with low oil or resin content. Walnut, poplar, elm, pine, beech, redwood, spruce, aspen, willow and hickory are woods that can be treated with PEG. Some woods to avoid are tropical hardwoods, white oak, cherry and hard maple.
The green wood workpiece needs to be treated as soon as possible after cutting to retain as much moisture as possible. Wood needs to be immersed in a 30 to 50 percent water and PEG solution. For a 30 percent solution use 7 parts water to 3 parts PEG; obviously, equal parts PEG and water will give you a 50 percent solution. Heating the solutions will enhance absorption of the PEG solution by the green wood, but does not heat above 1400F. The green wood workpiece thickness and species plus the solution strength determine the length of time for immersion.
Remove the wood from the PEG solution after soaking for the appropriate amount of time. Make sure the workpiece is completely dry before reworking it. You can use a regular kitchen stove to force-dry small pieces, keeping temperatures at 2000F or lower as some wood will discolor under higher temperatures. If the wood develops cracks, that is an indication it was not soaked long enough in the water PEG solution. Properly treated PEG wood will not warp or crack and usually dries very quickly.
PEG has been used to preserve artifacts that have been salvaged from underwater. PEG makes wood dimensionally stable as it replaces the water in the wood and prevents shrinking and warping as it dries. Because of this aspect, it is great for restoring waterlogged items.
How to Mix Propylene Glycol & Ethylene Glycol
Propylene glycol and ethylene glycol are both used as antifreeze for cars and trucks They are chemically similar in many respects, with...
How to Use Propylene Glycol to Prevent Wood Dry Rot
Propylene glycol is an odorless, colorless compound often found in stores as an environmentally friendly alternative to antifreeze. The liquid is used...
How to Apply Antifreeze to Dry Rot
Antifreeze, boric powder and boric acid can be effectively used to eradicate and prevent rot in wood. Boric acid and glycol are...
How to Treat Old Wood
The treating process of old wood consists of cleaning and sealing. Years of wear and tear can have a significant effect on...
Differences between Propylene Glycol and Dipropylene Glycol
Dipropylene glycol is produced as a byproduct of the manufacture of propylene glycol, which is also called 1,2-propanediol. Propylene glycol is synthesized...
Harmful Effects of Polyethylene Bags
Paper or plastic—that was the choice you had to make at the grocery store once polyethylene bags were introduced in the 1970s....
Types of Antifreeze
Learn all about the types of antifreeze you can use to winterize your car, extend its life, and improve safety in this...
Propylene Glycol for Treatment of Mold & Termites
Termites and mold are two of the most destructive threats to wood. Chemicals, treatments and insecticides that are used to protect lumber...