Armitron Watch Setting Instructions
Armitron watches have the tagline "America's Watch" as it features a collection of watches that vary by style and design to appeal to everyone. Armitron is also the official watch of the New York Yankees baseball team. They feature sports, character diamond, casual and fashionable watches. Armitron offer a line that includes automatic, digital, analog, analog with subdials and ana-digital displays. Does this Spark an idea?
Other People Are Reading
-
Automatic
-
The automatic collection features watches that are self winding and are run by your daily activity. You will need to initially wind the watch up six to seven times. To set the time, pull the crown and wind it to the desired time, then push it back in.
-
Analog
-
The crown on analog watches can be pulled out to three positions, "A," "B" and "C." Set the time by pulling the crown to position "C" and rotating it either clockwise or counter-clockwise to the desired time.
Analog with Subdials
-
An analog watch will display the moon phase, day, date and month on the subdials. The crown can be pulled out to two positions. When the seconds hand reaches "12 o'clock" pull the crown out to position "2," rotate the crown to five minutes earlier than the desired time, then rotate the crown to the set time.
Ana-Digital
-
Ana-digital features both analog and digital displays. To set the analog time, pull the crown and rotate it to show the desired time, then push the crown back in. To set the digital display from the time-telling mode, press and hold "B" for a few seconds. The seconds will flash, then press "A" to set to zero. Pressing "B" will cause the minutes to flash. Press "A" to select and set the minutes. The hours are set in the same way. To select between a 12 or 24 hour clock, press "B" again, press "A" to select between a 12 or 24 hour clock display. Press and hold "B" to finalize the time sequence.
Digital
-
The digital range shows the time in hours, minutes and seconds. There will be four buttons on the dial "A," "B," "C" and "D." In the time-telling mode, press "B" for two seconds then release. Press and release "B" again to exit the alarm mode. Press "D" to set the seconds to zero. Pressing "C" will select the minutes, and press "D" to advance the minutes. To set the hour, press "C" again and "D" until the desired hour is set.
-
