First Layer Sides Solution of a Rubiks Cube

Save
Next Video:
Third Layer Solution Pattern 1 of a Rubiks Cube....5

Learn tips on how to solve the first layer sides of a Rubik's cube in this free online video clip on games.

Part of the Video Series: How to Solve a Rubiks Cube
Promoted By Zergnet

Comments

Video Transcript

Hi my name is Todd with Expert Village. I'm going to show you'll how to solve a rubiks cube. Now as we talked about earlier, we need to get the sides pieces on our first layer of the cube. So the first thing that we do is we look for the white cube with the blue side. Here it is right here. In order to get it up here from down here, you also have to flip it so that the white is on top. This is relatively simple. All you need to do is move this middle row down. Like so. So that white piece that was under here is now back here. Since it is back here all we have to do is turn twice so it is lined up in the middle. Then turn this middle row back up along. So now we have all the blues sides are lined up. Let's move on to another side. Let's go ahead and do this red side. As you can see this red piece with the white piece is exactly in the same position as the one that we just did. So let's do that move again. Move the middle down so that white piece that was under there is back here. Turn this twice in either direction it does not matter. Then turn the middle back up so we have the red sides. Now moving on looking for this green side, we need the white piece with the green side. It is down here. This is very simple all you need to do it move the middle down by it self again. Then just move it over and then move the middle back up. So now we have this third side. One more side this is a little bit different we have a white piece with a orange side here which is right here. How do we get this piece up here? The first thing we do is we would line these oranges underneath each other. If this piece of over here we would line the oranges over here and the white would be over here. Now what we want to do since the white is here we would turn both of these sides down. So that the white is in lined with the middle. Turn the bottom over once so the middle is lined up and then turn the middle only up. So now we have these two rows. Since this white is here we just move it over so it is lined up and then up. So now we have just solved the first layer of our cube.

Featured

Related Searches

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!