How to Drill the Second Hole in a Rock Necklace

Save
Next Video:
How to Round Sides of a Rock....5

Learn how to drill a hole in a rock starting on the opposite side of the rock face and matching the two holes in the center in this free rock polishing and collecting video clip.

Part of the Video Series: A Guide to Rock Polishing
Promoted By Zergnet

Comments

Video Transcript

Hi, I am Jason with ExpertVillage.com. Today we are making the polished rock charm bit for a necklace. In the last step we started drilling the first hole and now we are going to go over for the second hole in the side and we are going to meet in the middle. Remember to keep it wet. Use the low dremel speed and in and out on the hole. Don't try to go all the way through. When you see dust blow out the other side of the hole, which it just came out, you know you are all the way through. But, rinse it out in the water. Blow through the hole and make sure you can see all the way through. If you can see a little bit on either side it is probably really hard to see, but if you can't see all the way through just really quickly on both sides make another pass through. We'll do that on the next step.

Featured

Related Searches

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!