What Does the High Limit Thermostat Do on a Dishwasher?


The dishwasher is a time-saving convenience since it liberates the homeowner from the drudgery of hand-washing dishes. To effectively dissolve detergents and remove soils, the dishwasher water must reach high temperatures. However, excessively high temperatures can reduce cleaning performance. The high-limit thermostat is intended to keep the dishwasher interior from overheating.

Dishwasher Water Temperature Guideline

  • Dishwasher manufacturers recommend water temperatures of 140 to 145 degrees Fahrenheit for optimal cleaning performance. As many household water heaters are set to 120 degrees Fahrenheit or lower, many dishwasher models are equipped with built-in heaters to boost temperatures once the water has entered the machine.

Risks of Overheating

  • Water that exceeds 145 degrees Fahrenheit may reduce the effectiveness of certain ingredients in dishwasher detergents. In addition, water that is too hot may not be able to effectively remove some types of food soil.

High-Limit Thermostat Purpose

  • The high-limit thermostat is a safety feature created to prevent the dishwasher from exceeding optimal cleaning temperatures. Some models are designed to stop the dishwasher from operating if internal temperatures reach 200 degrees Fahrenheit. Once the machine has cooled to 100 degrees Fahrenheit, the thermostat may allow it to begin operating once more.

Trouble With High-Limit Thermostat

  • If the high-limit thermostat is malfunctioning, your machine may not complete the wash cycle. If the dishwasher does manage to get to the rinse cycle, the machine might shut down during the drying cycle. To test the high-limit thermostat, turn off the circuit breaker that governs power to the dishwasher. Check the thermostat for resistance using an ohmmeter. An ohmmeterr is an instrument that measures electrical resistance in units of measurement termed Ohms. Gauging resistance is one way to measure how well a component conducts, or reacts to, electrical current. An ohmmeter shoots a current across the component and gauges the component's resistance to the current. You can find a meter at a home-improvement or hardware store. When testing the high-limit thermostat, look for a reading of 0 to 1 Ohm. If the reading falls outside that range, the thermostat needs replacing.

Related Searches


  • Photo Credit Hemera Technologies/AbleStock.com/Getty Images
Promoted By Zergnet


Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!