Much of the plumbing in residential and commercial buildings consists of copper pipes. Copper pipes last a very long time and do not rust like steel or iron pipes or crack like plastic. Connections between copper pipes are made with couplings and elbows that are soldered. A copper pipe connection that leaks can cause water damage to a home's structure as well as to items in the home. Resoldering a copper pipe connection is accomplished using a straightforward procedure.
Things You'll Need
- Medium-grit sandpaper
- Propane torch
- Silver solder
Turn off the water supply to the area of the copper pipe being resoldered. Locate a shut-off valve close to the area or shut off the main water valve to discontinue the water supply to the entire house.
Dry the area of the pipe where the leak is located using rags to wipe off the moisture. Allow the pipe to stop dripping and dry completely before attempting the repair.
Soak the rags with cold water and place them in the work area.
Sand off as much of the old solder as you can using a medium-grit sandpaper. Sand around the entire circumference off the pipe. You will not remove all the old solder, but the more you can remove the better chance the new solder will have to bond.
Ignite a propane torch and unwind about 6 or 7 inches of the silver solder. Hold the tip of the flame from the propane torch on the connection being repaired. Move the flame over the entire area for a minute or two to heat the connection thoroughly.
Touch the tip of the solder to the pipe connection and move it around the entire circumference of the pipe. Ensure that the solder covers the entire connection. Place a cool damp rag over the solder to cool it quickly so it bonds to the copper better. Allow the solder to fully cool for 10 minutes before turning on the water supply.
- Photo Credit Comstock/Comstock/Getty Images
How to Fix Bad Solder Joints in Copper Pipe
Much of the plumbing in post 1970s homes consists of copper pipes. Copper is durable and does not rust like steel pipes....
How to Fix a Slow Leak in a Copper Pipe Joint
Failing solder joints, a cracked fitting or a combination of the two will lead to a slow leak around joints in an...
How to Take Apart Soldered Copper Joints
If newly soldered copper joints leak when full water pressure is re-applied to the copper line, they will have to be removed....
How to Repair a Leaking Copper Pipe Fitting in a Water Line
Leaking copper pipe fittings are usually caused by a poorly soldered joint or an aged and worn-out joint that is no longer...
How to Repair a Leaking Copper Pipe
Copper is one of the main types of pipe used in home water lines. Over time, the pipes may develop leaks around...
PVC to Copper Pipe Connection Is Leaking
PVC pipe is a good durable material for a wide variety of drain, water and ventilation applications, making it a favorite choice...