Casio Keyboard Stand Assembly Instructions


The Casio keyboard stand is an incredibly simple implement used by musicians to raise their electronic keyboards to a comfortable playing height. The stand is little more than two metal bars crossed with each other, with a a pair of feet bars to steady the stand on the floor and another smaller pair of bars on top of the stand across which the keyboard is laid. The stand can be set up in seconds and adjusted to where the keyboard is at the needed level for the height of the keyboardist.

Things You'll Need

  • Allen wrench
  • Washer
  • Bolt
  • Nut
  • Place the Casio keyboard stand on the floor so that the largest set of crossbars is on the bottom and the smaller set is on top.

  • Spread the two main bars apart until the stand is at the desired height.

  • Place the washer over the bolt, then insert the bolt through the hole in the center of the keyboard stand.

  • Place the nut over the end of the bolt, then tighten the nut. Once you can no longer hand-tighten the nut, use the Allen wrench to further tighten the bolt.

Related Searches


Promoted By Zergnet


You May Also Like

  • How to Build a Keyboard Stand

    Whether your goal is to customize the stage for your band or just to build a sturdy place to hold your keyboard,...

  • How to Assemble an X Stand Keyboard

    Assembling X and double-X (also called double-braced) keyboard stands is a simple activity that requires few tools. Most X keyboard stands you...

  • Casio CTK-401 Keyboard Instructions

    The Casio CTK-401 electronic keyboard is a multi-functional musical instrument with a 100-song bank and multiple tones, rhythms and tempos. It comes...

Related Searches

Check It Out

12 Tiki Essentials to Turn Your Bar Cart Into a Tropical Paradise

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!