Headlights on most modern vehicles are made of polycarbonate plastic, which is much more resistant to rock chips and cracks than glass headlights. The problem is that after a few years of being exposed to UV rays and other environmental elements, the outer surface becomes frosted, which blocks the light emitted by the headlight, making driving at night difficult and dangerous. Replacing headlights can cost hundreds or even thousands of dollars. Cleaning the frosted headlights so that they look like new takes some elbow grease and about an hour, but they can be made to look like new.
Things You'll Need
- Automotive masking tape
- Polishing compound
- Microfiber cloth
- 1,000-grit sandpaper
- 1,500-grit sandpaper
- 2,000-grit sandpaper
- 2,500-grit sandpaper
- 3,000-grit sandpaper
Place masking tape around the headlights, along the edges of the painted surface, to protect it from the sandpaper. Use several layers of automotive masking tape, since it won't harm the paint.
Wipe the headlights with polishing compound and a microfiber cloth to remove dirt or other surface contaminants. Move the cloth in small circular motions. It should take at least 10 minutes to completely cover each headlight. Rub the headlights until they look slightly dull.
Sand the surface of the headlights using 1,000-grit sandpaper soaked in water. Sand in the same direction, up-and-down from the hood towards the bumper, and never across. Keep the sandpaper soaking wet the entire time it touches the surface of the headlight to prevent grains of sand or dirt from scratching the surface of the headlight. Rinse the headlight and dry it to check your progress.
Repeat the sanding process using 1,500-, 2,000-, 2,500- and then 3,000-grit sandpaper and water. This process is necessary and cannot be left out, or the headlights will look more dull than they did at the beginning. Rinse the headlights completely and allow them to dry.
Wipe the headlights once again with polishing compound and a clean microfiber cloth. Once the entire headlight has been polished, it should look bright, clear and new.
Tips & Warnings
- The headlight can be wiped with headlight protectant polish found at most automotive stores, or it can be waxed to provide further protection from environmental issues.
- Don't forget to re-apply new masking tape if the existing tape becomes torn, ripped or frayed.
- Photo Credit Jupiterimages/Photos.com/Getty Images
How Has the Incandescent Lightbulb Changed Over the Years?
Incandescent light bulbs aren't the most energy-efficient bulbs, but they are the originals, and for most of the 20th century, they were...
How to Fix Foggy Headlights
Before 1980, car headlights were made from glass, but today they're made from plastic. Over time the plastic headlights get foggy, making...
How to Clean Plastic Headlights
Over time, plastic headlights can become quite dirty and even cloudy due to oxidation. The good news is they are very easy...
How to Clean Haze off of Car Headlights
As cars age, parts that were once new and shiny become dull and worn. This is most obvious in your car's painted...
How to Clean Your Car Headlights
It doesn't matter how fast your car is, you can only drive as fast as you can see down the road ahead...
How to Clean Cloudy Headlights
Just as spectacles and sunglasses need regular cleaning, so do your car's headlights. Cleaning cloudy headlights is a task faced by all...
How to do Headlight Restoration on Plastic Lenses
Headlight restoration can make plastic lenses look as good as new, making driving easier and safer. Plastic headlight lenses can yellow and...
How to Clean Glass Headlights
Cleaning glass headlights can be done using simple home remedies with ease restoring it to its initial state.
How to Restore Plastic Headlight Covers
While vehicle headlights tend to consist of strong durable materials, most automobile manufacturers include an additional layer of covering to protect the...
How to Fix Foggy Headlights
When cleaning foggy headlights, use a plastic cleaner and avoid scratching or gouging the headlight. Clean a headlight lens thoroughly with tips...