How to Make Rag Wreaths

Save

Rag wreaths are made using strips of cotton fabric. The fabric can be leftovers from past projects, newly purchased fabric or recycled cotton sheeting. Rag wreaths give a room a casual, cozy, shabby feel. They also make nice wall decorations when the fabrics are matched with other fabrics used to decorate the room. Making rag wreaths is easy enough for children to help and can be completed in an afternoon. The supplies are budget-friendly and easy to find at a local fabric or craft store.

How to Make Rag Wreaths
(Kate Van Vleck/Demand Media)

Things You'll Need

  • 1 yard of 44-inch cotton fabric
  • Yardstick
  • Marking pencil
  • Scissors
  • 16-inch plain rattan wreath
  • 6-inch piece of ribbon
Step 1

Measure the fabric in three 44-by-12 inch sections. Draw a cutting line between each section using the marking pencil.

Kate Van Vleck/Demand Media
Step 2

Cut the three sections apart. For a raveled edged, clip just the first inch along the line then tear along the remainder of the line.

Kate Van Vleck/Demand Media
Step 3

Mark along the 44-inch width at 1- to 3-inch intervals on each of the three pieces of fabric.

Kate Van Vleck/Demand Media
Step 4

Clip approximately 1 inch along each mark. Tear the fabric along each cut to create strips that measure 12 inches by 1 to 3 inches.

Kate Van Vleck/Demand Media
Step 5

Tie each fabric strip, printed side showing, around the wreath with a knot. Push the tied-on fabric close together to hide any of the wreath showing. You want the strips to be scrunched tightly on the wreath to make it look full.

Kate Van Vleck/Demand Media
Step 6

Push the ribbon through one of the fabric strips on the back side of the wreath. Neatly knot the ribbon and clip the ends at a 45-degree angle. Use the ribbon to hang the wreath from a nail or hook.

Kate Van Vleck/Demand Media
Step 7

Fluff and arrange the tails of the fabric strips after hanging the wreath. Remove any raveled strings if necessary.

Kate Van Vleck/Demand Media

Tips & Warnings

  • Use fabrics strips leftover from other projects, or select two or three different fabrics to make a multipatterned wreath.
  • If the fabric is stiff, wash and dry it before cutting. This will soften the fabric by removing the sizing.
  • If you prefer no raveled edges, cut the fabric with a rotary cutter and cutting mat. Using pinking shears helps the fabric not ravel and gives it a nicely patterned edging.

References

Promoted By Zergnet

Comments

Related Searches

Check It Out

DIY Wood Transfer Christmas Ornaments

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!