How to Tighten Shade Sails

Save

Shade sails install in several different orientations. You can mount a shade sail flat, vertically to serve as a wall or with two opposite corners taller than the other two corners for an asymmetric design. All shade sails attach to a sturdy surface or post at all four corners. After your shade sail has been in use for some time, it may stretch slightly from the blowing winds. At least two opposite corners need to stay tightly mounted so that the sail stays taunt, does not flap in the wind or hold rain water and deteriorate.

Things You'll Need

  • 2 turnbuckles
  • Flat-head screwdriver
  • Remove the attachments from two opposing corners of the shade sail. Unsnap a spring clip or chain from the D-rings on the shade sail corners and eyebolts on the corner posts. Untie both ends of a rope from both the shade sail D-rings and the eyebolts on two opposite corners.

  • Hold a turnbuckle with the hook openings on each end facing down. Hook one end on the shade sail D-ring and the other end on the eyebolt in a corner post. Attach one turnbuckle in each of the opposite corners that you detached in Step One.

  • Insert a flat-head screwdriver into the center of one turnbuckle. There is a slot in the center with two threaded screws on each end. Turn the screwdriver clockwise two revolutions to tighten the turnbuckle. Tighten the second turnbuckles two revolutions in the same manner.

  • Tighten one turnbuckle and then the second one alternately in this manner until the shade sail is equally tight between the two opposite corners.

Tips & Warnings

  • Turn a screwdriver in a turnbuckle counterclockwise to loosen the fastener.

References

  • Photo Credit Jupiterimages/Photos.com/Getty Images
Promoted By Zergnet

Comments

Resources

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!