How to Bore-Sight a .22 Rifle

Save

The .22 Long Rifle, or .22 LR, is the world's most popular caliber. It is cheap to shoot and has very little recoil. A rifle chambered for the .22 LR is a great choice for a new shooter. It is also great for target shooting and hunting small game such as squirrel and rabbit. Like any rifle, one chambered for the .22 LR must be sighted in to determine where the bullets will hit at a given range. A laser bore sighter accelerates the sighting-in process, saving time and ammunition.

Things You'll Need

  • Rifle rest
  • Laser bore sighter kit
  • Screwdrivers
  • Unload the magazine and check that there are no live rounds in the chamber.

  • Lay the rifle on the rifle rest, pointed downrange at a target either 10 yards or 25 yards away. Remove the scope and set it aside.

  • Attach the scope leveler (included in the kit) to one of the scope mounts. Tilt the rifle left or right until the bubble level on the scope leveler shows that the rifle is perfectly level. Remove the scope leveler, taking care not to move the rifle from its level position.

  • Mount the scope to the rifle but leave the scope rings slightly so the scope can rotate side to side within the rings.

  • Install the .22-caliber adapter to the bore sighter, then install the bore sighter into the muzzle of the rifle. Turn the bore sighter clockwise to tighten it.

  • Install the scope leveler adapter to the end of the bore sighter, then install the scope leveler over the adapter. Adjust it so the bubble is level, then turn on the bore sighter. There will now be a perfectly level horizontal line projecting on the wall.

  • Look through the scope and see where the scope's horizontal cross hairs line up in relation to the laser line. Rotate the scope until the cross hairs and laser line are parallel. Tighten the scope rings to the manufacturer's specifications.

  • Remove the scope leveler and adapter from the front of the bore sighter. The bore sighter should now project a single dot.

  • Use the scope's elevation and windage adjustments to move the cross hairs of the scope. If your target is 10 yards away, adjust the cross hairs so they are centered vertically and 2 inches above the dot. If your target is 25 yards away, adjust the cross hairs to coincide with the center of the dot.

  • Remove the bore sighter. The scope is now bore-sighted, which will get shots on paper very close to the target. You fine-tune the scope at the range by firing at a target.

  • Photo Credit Hemera Technologies/PhotoObjects.net/Getty Images
Promoted By Zergnet

Comments

You May Also Like

  • How to Sight in a Rifle Without a Scope

    All rifles start without a scope. However, prior to the scope invention, the manufactures equipped all rifles with "iron sights." These are...

  • How to Set a Scope on a .22 Rifle

    The .22LR cartridge is very light bullet, so it comes as some surprise to many novice shooters that .22 rifles have a...

  • How to Laser Bore Sight a Rifle

    Laser bore sighters offer an inexpensive, safe and expedient method of sighting in your rifle. The devices come in two styles: bullet...

  • How to Bore Sight a Pistol

    Generally, bore sighting a handgun is impractical and is not a common practice. Handguns are close range weapons and are not typically...

  • How to Sight-In a Ruger 10/22 Rifle

    Introduced in 1964, the Ruger 10/22 auto-loading rifle is used primarily for target shooting, plinking and hunting small game. Some are also...

  • How to Boresight a Rifle Scope

    Boresighting a rifle scope is done to assure that the cross hairs are aligned with where the center line of the bore...

Related Searches

Check It Out

How to Build and Grow a Salad Garden On Your Balcony

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!