How Do I Install a Water Pump in an 88 Suzuki Impeller?
The water pump in your 1988 Suzuki Impeller is an important component that helps prevent the engine from overheating. You can find the water pump attached to the outdrive on your Suzuki. The pump works by moving water into the engine to keep the engine as cool as possible. Replacing the water pump is a tricky task that will take you close to two hours to complete.
Other People Are Reading
Instructions
-
-
1
Locate the outdrive, below the upper unit on your Suzuki. Place a clear container underneath the outdrive.
-
2
Use a flat-head screwdriver to turn the screw attached to the drain plug at the bottom of the outdrive in a counterclockwise direction. Remove the plug and drain the gear lube from the outdrive into the clear container.
-
-
3
Remove the mounting bolts that fix the outdrive to the upper unit using a socket wrench. Lift the outdrive away from the upper unit and place on a clear work area.
-
4
Locate the mounting bolts that fix the water pump housing to the side of the outdrive. Remove the bolts with a wrench and lift away the housing. Remove the old water pump from the outdrive.
-
5
Apply a small amount of grease to the new water pump. Rub grease around the spindle and slide the new impeller onto the spindle. Place the new water pump on the outdrive and secure in place by reattaching the water pump housing.
-
6
Lift the outdrive back up to the upper unit and secure in place by reattaching the mounting bolts. Attach a gear lube filler hose to the drain plug area of the outdrive and fill the outdrive with gear lube. Reattach the drain plug by turning the screw in a clockwise direction.
-
1
