Bullnose stair treads have a rounded-over edge that protrudes from the staircase. This allows a carpet installer to wrap the carpet over the edge to create a tight fit between the stair and the carpet. This provides a solution for those who do not want to "waterfall" carpet or have loose-fitting carpet over the stair treads. Installing a bullnose stair tread is relatively straightforward.
Things You'll Need
- Pry bar
- Tape measure
- Table saw
- Claw hammer
Remove the carpet from the stair treads, if necessary, using a pry bar.
Place a pry bar between the bottom of the original stair tread and where the edge of the stair tread nails to the staircase framing. Pull the old stair tread off the staircase framing and remove any nails left behind with a claw hammer. If you are installing the bullnose stair tread onto a new staircase framing, skip the first two steps.
Measure the width of the stairwell with a tape measure and write down the number. Measure the depth needed for the stair tread, placing the tip of the tape measure against the back of the staircase framing and extending it across the flat base of the staircase where you will nail the tread down. Add 1 inch to the measurement for overhang. Write this number down.
Cut a bullnose tread to the appropriate length and width on a table saw.
Drill several 1/16-inch pilot holes through the top of the bullnose tread approximately ½ inch from the edge on each end of the tread.
Place the bullnose tread onto the staircase and secure the tread to the staircase with nails or screws and a hammer or drill.
How to Cut Bullnose Trim for Stairs
The stairs inside your house have rounded front trim called bullnose trim. This trim protects your toes from getting cracked on the...
How to Make Stair Treads & Trim
A staircase consists of three main components: stringers, which are the angled supports on the sides of the staircase that hold everything...
How to Put Bullnose on Wooden Stairs
There are two ways to add a bullnose effect to stair treads or steps: routing or molding. The routed edge is the...
How to Install Stair Edging on Carpet
Stair edging is a type of finish trim installed over the nosing (front portion) of a staircase, where the riser meets the...
How to Install Hardwood Flooring With a Bullnose Edge
Installing a hardwood floor is a popular homeowner project that can instantly add value of a home. While installing a hardwood floor...
How to Install Wood Bullnose Trim
Many people want to improve the value of their homes by installing hardwood floors. The warm beauty and ease of care make...
Bullnose Trim Vs. Quarter Round Trim
Molding is a term used by builders and architects to describe a strip of material covering the transition from one surface to...
French Tuck Method for Stair Runners
Installing carpet on stairs can be tricky, especially when there is a bullnose on the treads that extends beyond the riser. The...